R & D Marine

R & D Marine

Engine Mounts

Download Technical Catalogue

Filters

Filters
99 products
Sort by
Sort by
910-001 R&D Flexible Shaft Coupling (4" x 5HP B/W, Hurth)
R&D Marine910-001 R&D Flexible Shaft Coupling (4" x 5HP B/W, Hurth)
$441.42
800-003 R&D Compression Engine Mount 800-003 R&D Compression Engine Mount
R&D Marine800-003 R&D Compression Engine Mount
$214.74
202-027 R&D 5" Short Solid Half Coupling Pilot Bored
R&D Marine202-027 R&D 5" Short Solid Half Coupling Pilot Bored
$315.85
Out of Stock
R&D Couplings 6" x 32HP ZF61V Open Centre
R&D MarineR&D Couplings 6" x 32HP ZF61V Open Centre
$4,248.01
R&D Earthing Connector Size (15mm x 57mm)
R&D MarineR&D Earthing Connector Size (15mm x 57mm)
$151.51
R&D Earthing Connector Size (15mm x 57mm)
R&D MarineR&D Earthing Connector Size (15mm x 57mm)
$107.38
R&D Earthing Connector Size (25mm x 57mm)
R&D MarineR&D Earthing Connector Size (25mm x 57mm)
$136.90
R&D Earthing Connector Size (17mm x 57mm)
R&D MarineR&D Earthing Connector Size (17mm x 57mm)
$107.38
R&D Earthing Connector Size (23mm x 57mm)
R&D MarineR&D Earthing Connector Size (23mm x 57mm)
$136.90
R&D Earthing Connector Size(mm) 19*57 To Suit Coupling 910-017,18,25,26
R&D MarineR&D Earthing Connector Size(mm) 19*57 To Suit Coupling 910-017,18,25,26
$136.90
R&D Steel Split Half Couplings 5" YANMAR 21mm
R&D MarineR&D Steel Split Half Couplings 5" YANMAR 21mm
$706.86
R&D Couplings 4" x 8HP VOLVO MS2
R&D MarineR&D Couplings 4" x 8HP VOLVO MS2
$508.52
R&D Couplings 5" x 25HP B/W
R&D MarineR&D Couplings 5" x 25HP B/W
$1,775.50
R&D Engine Mounts 73-305kg (160-671lbs) 3/4" UNF Double Acting
R&D MarineR&D Engine Mounts 73-305kg (160-671lbs) 3/4" UNF Double Acting
$506.14
R&D Engine Mounts 73-168kg (160-370lbs) 5/8" UNF Compression Mountings
R&D MarineR&D Engine Mounts 73-168kg (160-370lbs) 5/8" UNF Compression Mountings
$214.74
R&D Engine Mounts 36-105kg (80-230lbs) 5/8" UNF
R&D MarineR&D Engine Mounts 36-105kg (80-230lbs) 5/8" UNF
$256.50
R&D Engine Mounts 32-146kg (70-320lbs | M16 Yanmar Y200)
R&D MarineR&D Engine Mounts 32-146kg (70-320lbs | M16 Yanmar Y200)
$558.03
R&D Engine Mounts 55-186kg (120-410lbs) 5/8" UNF
R&D MarineR&D Engine Mounts 55-186kg (120-410lbs) 5/8" UNF
$256.50
R&D Engine Mounts 55-187kg (120-411lbs) 3/4" UNF
R&D MarineR&D Engine Mounts 55-187kg (120-411lbs) 3/4" UNF
$268.13
Out of Stock
R&D Engine Mounts 28-109kg (60-240lbs) M16 Yanmar Y150
R&D MarineR&D Engine Mounts 28-109kg (60-240lbs) M16 Yanmar Y150
$558.03
Out of Stock
R&D Engine Mounts 295-772kg (650-1700lbs) 3/4" UNF
R&D MarineR&D Engine Mounts 295-772kg (650-1700lbs) 3/4" UNF
$1,146.48
R&D Engine Mounts 23-73kg (50-160lbs) M16 Yanmar Y100
R&D MarineR&D Engine Mounts 23-73kg (50-160lbs) M16 Yanmar Y100
$558.03
Out of Stock
R&D Engine Mounts 296-682kg (650-1500lbs) 3/4" UNF
R&D MarineR&D Engine Mounts 296-682kg (650-1500lbs) 3/4" UNF
$475.11
Out of Stock
R&D Engine Mounts 228-546kg (500-1201lbs) 1" UNF Cummins
R&D MarineR&D Engine Mounts 228-546kg (500-1201lbs) 1" UNF Cummins
$640.64

R & D Marine

Engine Mounts

The R&D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust, yet soft enough to isolate drivetrain vibrations from the hull.

SPLIT COUPLINGS

R&D Marine has developed a comprehensive range of competitively priced Steel Clamp Half Couplings with flange sizes from 4" to 7-1/4" diameter.

FLEXIBLE SHAFT COUPLINGS

The R&D Marine Flexible Coupling fits between the transmission output flange and shaft coupling. It is designed to protect a boat's drivetrain. The unit will reduce vibration, compensate for some misalignment, isolate the shaft and absorb shock loads.

Damper Drive Plates

R&D Marine Damper Drive Plates are designed to prevent gearbox rattle at low engine speeds, which allows an engine to operate through its entire RPM range.